AUTOMATIC FIRE CURTAINS

FOR COMMERCIAL PROJECTS

Contain Fire.
Protect Escape Routes.
Preseve Open Design.

Automatic, gravity fall-safe fire curtains tested to BS EN 1634-1 for upto 240 minutes.

GET EXPERT ADVICE REQUEST A QUOTE

Fill out the form and our team will get back to you shortly.


UP TO
240 MIN

BS EN
1634-1

EN
13501-2

2 HOUR
POWER BACKUP

Built for Openings Where Fire-Rated Walls Are Not Practical

Atrium

Lift Lobby

Corridor or
Escape Route

Stairwell

Other Large Opening

How it Works

1

Detect

Fire detection system

Fire detection system activates the fire curtain control panel.

2

Deploy

Fire curtain deployment

The curtain automatically deploys using the gravity fail-safe system.

3

Contain

Fire and smoke containment

The curtain contains fire and smoke, limiting spread and heat.

4

Protect

Protected escape routes

Escape routes and critical areas are protected for safe evacuation and response.

›
›
›

Tested. Certified. Performance You Can Rely On.

FIROBLOCK automatic fire curtains are tested to BS EN 1634-1 for up to 240 minutes and classified to EN 13501-2.

Tested to
BS EN 1634-1
Up to 240 Minutes

Classified to
EN 13501-2

Engineered for
Reliability

Designed for
Easy Maintenance

Single Barrel vs Multi Barrel options

Single Barrel

Compact and discreet.

Ideal for standard

openings with limited headroom.

Multi Barrel

For wider openings

and higher fire ratings.

Enhanced performance and stability.

Share Your Drawings.
Get the Right Fire Curtain Specification.

Our fire-safety specialists will review your drawings and recommend the right solution for your project.

Frequently Asked Questions

What is the maximum fire rating available?

An automatic fire curtain is a deployable fire-resistant barrier designed to protect openings and support fire compartmentation within a building. During normal operation, it remains concealed above the opening. When it receives a signal from the building’s fire-alarm system, it automatically descends to help restrict the spread of fire and heat.

The curtain normally remains retracted inside a compact headbox, keeping the protected area open and unobstructed. When the fire-alarm system is activated, the curtain automatically descends along its side guides and creates a fire-resistant barrier. After the emergency or system test is completed, it can be reset and retracted according to the approved operating procedure

FIROBLOCK Automatic Fire Curtains are available in configurations providing fire resistance of up to 240 minutes. The system is tested to BS EN 1634-1 and references EN 13501-2. The applicable rating depends on the proposed dimensions, configuration, installation conditions, and supporting technical documentation for the project.

What happens dueing a power failure?

The FIROBLOCK system incorporates a gravity fail-safe deployment mechanism designed to lower the curtain safely when required. An integrated battery-backup option is also available. The precise power, control, and emergency-operation arrangements should be confirmed according to the project’s approved fire-safety strategy.

Automatic fire curtains can be used in shopping malls, hospitals, airports, hotels, corporate offices, IT parks, high-rise buildings, industrial facilities, lift lobbies, atriums, corridors, and other large openings where permanent fire-rated walls or doors may not be practical. Suitability must be evaluated according to the building’s fire strategy and site conditions.

Yes. FIROBLOCK can support project teams with drawing reviews, opening assessments, system selection, technical coordination, installation, testing, commissioning, and maintenance guidance. To receive an accurate recommendation and quotation, share your project drawings, opening dimensions, required fire rating, location, and fire-safety requirements with the FIROBLOCK technical team.

Download Brochure